DuraNet Plus Product Specifications | Welcome To Duranet

DuraNet Plus Product Specifications

1) Specification of physical Properties:

Specifications Requirements Range Test Standards
Fiber Analysis 100% High density Polyethylene fibers ISO 1833:1977
Number of Filaments Monofilament
Linear Density 150 Denier Not less than150 Denier BS 5441:1998
Mesh 20 (holes per cm²) Minimum 20 (holes per cm²) ISO 7211/2: 1984
Fabric Weight(G.S.M) 45 gms / sq.mt +/- 10% BS EN 12127/ ISO 3801
Dimensional stability to washing Not more than 10% shrinkage and not more than 5% expansion in both directions Not more than 10% shrinkage and not more than 5% expansion in both directions Marking & Measuring – ISO 3759 (2007)
Method of Washing – ISO 6330 (2001)
Method of Calculation – ISO 5077 (1984).
Bursting strength Min 350 kPa in both fabric and seams Minimum 350 kPa ISO 13938/2: 1999
Flammability Non-inflammable (Test EN1102) EN 1102:2016

2) Specification for Chemical Properties:

Specification Requirements Range Test Standards
Active ingredient – Alphacypermethrin content 6.0 g/kg (or) 270 mg/m² +/- 25% 454/LN/M/3.2, CIPAC Handbook M, p. 41,2009
Synergist-Piperonyl butoxide content 2.2 g/kg (or) 99 mg/m² +/- 25% CIPAC/4941, extension of 33/LN/(M)/3, CIPAC Handbook N, p. 112, 2012
Free WordPress Themes, Free Android Games