Specifications
Home » Specifications
1) Specification of physical Properties:
| Specifications | Requirements | Range | Test Standards |
|---|---|---|---|
| Fiber Analysis | 100% High density Polyethylene fibers | – | ISO 1833:1977 |
| Number of Filaments | Monofilament | – | – |
| Linear Density | 150 Denier | Not less than 150 Denier | BS 5441:1998 |
| Mesh | 20 (holes per cm²) | Minimum 20 (holes per cm²) | ISO 7211/2: 1984 |
| Fabric Weight(G.S.M) | 45 gms / sq.mt | +/- 10% | BS EN 12127/ ISO 3801 |
| Dimensional stability to washing | Not more than 10% shrinkage and not more than 5% expansion in both directions | Not more than 10% shrinkage and not more than 5% expansion in both directions | Marking & Measuring – ISO 3759 (2007) Method of Washing – ISO 6330 (2001) Method of Calculation – ISO 5077 (1984). |
| Bursting strength of the fabric | Not less than 400 kPa | The average shall be not less than that declared | ISO 13938/2: 1999 |
| Bursting strength of the Seams | If seams are present their average bursting strength shall be not less than the measured average for the fabric | – | ISO 13938/2: 1999 |
| Flammability | Non-inflammable (Test EN1102) | – | EN 1102:2016 |
2) Specification for Chemical Properties:
| Test | Requirements | Range | Specification |
|---|---|---|---|
| Active ingredient – Alphacypermethrin content | 5.8 g/kg (or) 261 mg/m² (or) 0.58% w/w | +/- 25% | 454/LN/M/3.2, CIPAC Handbook M, p.41, 2009. |